Concrete Contractor in Centennial - Driveways and Patios Built on a Solid Base
Prestige Castle Rock Concrete is a concrete contractor based in Castle Rock that pours driveways, patios, walks, steps and garage floors for homeowners in Centennial, CO, and replaces cracked and sunken slabs.
Homes and driveways across Centennial
Centennial is mostly neighborhoods, street after street of single-family homes with an attached garage, a front walk and a patio out back, with shops and offices along the bigger roads. Nearly all of what we pour here is flatwork, the driveways, patios and walks that lie flat on the ground, and we're often here the same week we're working in Lone Tree or Greenwood Village.
A lot of the concrete here went in when the houses did, and it shows. We see sunken corners, lifted walk panels and patios that were too small to begin with, so we usually know what to look for before we've parked the truck.
Permits, licenses and price in Centennial
Permits in Centennial go through the city's Building Division, which issues permits for work that builds, adds to, alters or repairs a building or structure, approves contractor licenses and does the inspections. Whether your slab falls under that is the division's call, so when it isn't clear we ask them instead of guessing, and when a permit is needed we handle it before we dig, which can push the start date back. Any contractor on a city permit has to be licensed with the City of Centennial, and every business working here needs a city business license, so both are fair questions for anyone you're thinking of hiring. We're licensed and insured.
What moves the price here is the size of the slab, how much old concrete we haul out, how much base the ground needs, how close the truck can get and the finish you pick. A broom finish, a light texture dragged across the wet surface so it isn't slick underfoot, costs less than a stamped pattern. The schedule turns on the permit, if there is one, and on lining up a good pour day. We bring the same crew and the same base work here as in Highlands Ranch, and the estimate spells out what's included for your job, from the mix to the base work and the finish.
Services in Centennial, CO
Concrete driveway building
Many Centennial driveways are original to the house and have settled at the edges. We tear out, dig to firm ground, pack the base and pour.
Concrete patio construction
Plenty of backyards here came with a small builder slab. We pour a concrete patio sized for how you'll use it, sloped away from the house.
Concrete sidewalk building
Front walks here tend to heave at tree roots or sink by the porch. We replace the bad panels or the whole run on a packed base.
Concrete steps construction
Steps pulling away from the house trip people and send water to the foundation. We tear them out and pour new ones on proper footings.
Garage floor concrete
Garage slabs take the weight of every car and whatever drips off it. We pour new floors at a thickness that suits the load and trowel them smooth.
Concrete cutting
Adding a walkway or widening a driveway here usually means cutting into old concrete. We saw a straight line so the new pour meets the old cleanly.
What Centennial lots ask of new concrete
On most Centennial lots, the first thing I check is where the water goes. Plenty of the slabs we look at have settled enough to tip back toward the house, so water runs to the foundation or sits in a puddle in the middle, and we set the grade on the new pour so it falls away from the house. If the water has nowhere to go, you'll hear that at the estimate, not next spring.
The other thing is what's underneath. When old concrete comes out here, the subgrade, the dirt the slab sits on, often turns out to have been raked flat and never packed, which is why it sank. We dig down to firm ground, bring in base and compact it, and set rebar, the steel inside that holds the slab together if it does crack. If the budget has to give somewhere, cut the fancy finish and keep the base, because nobody sees the base on pour day and it's the one part you can't fix later without tearing the whole thing out.
Get a free estimate for your Centennial concrete
We get back to you within one business day to set a time, then I come out to your place in Centennial, look at the job and write up an estimate that lists what's included. It's free, it's done on site, and there's no pressure to book.
How a Centennial job goes
Call or send the form
Call (720) 676-1126 or send the form with a few words about the job, and we'll set a time for me to come out. It helps if you can be there for that visit so you can show me the problem spots.
I measure and price it
I measure, ask how you'll use the slab and what's under it, then write up an estimate that lists the mix, the base work and the finish. That way you see what you're paying for, and what you aren't, before you decide anything.
We handle the permit first
If the job needs one, we file it with the city before any work starts. Where plan review is required it takes about 5 to 20 business days, and the permit is issued only once every review is approved and the fees are paid.
We prep, pour and finish
Our crew digs out, packs the base, forms and pours, and I run the pour myself. We cut control joints, shallow grooves that give the slab a straight line to crack along, then leave you plain notes on curing and first winter care.
Centennial concrete questions answered
Is it cheaper to repair or replace a cracked concrete driveway in Centennial?
Patching is cheaper up front, but if the cracks come from a base that's sinking, a patch usually just buys time before it opens again. Hairline cracks on a slab that's still level can often be left alone, while a driveway that's tipping or breaking into pieces usually needs to come out. I'll tell you which one you've got at the estimate, and it lists what each option includes.
Can I pull my own concrete permit in Centennial as a homeowner?
Only if you're doing the work yourself and you live in the house, and you'll sign the city's homeowner agreement when you apply. If our crew is doing the job, the permit goes through a contractor licensed with the city, as the city's building permit rules lay out, and we take care of it.
How do I find out if my Centennial home is in a floodplain?
Look up your address on the city's floodplain map. Any project in a floodplain inside the city needs a floodplain development permit, which the Southeast Metro Stormwater Authority reviews and issues, and homes in the highest-risk zones have a 26 percent chance of flooding over a 30-year mortgage. If you're in one or right next to it, tell us at the estimate so it's part of the plan before anything gets formed.
What causes concrete driveways to crack and sink in Centennial?
Most of the sinking we see comes from ground under the slab that was raked level instead of dug out and packed, so it settled after the pour. Water does the rest when the slab tips toward the house, and cracks wander across the middle when the joints were cut late or skipped. A new slab can still crack, but with a packed base, good drainage and joints cut on time, it should crack where we planned it and stay level.
How long do I have to stay off a new concrete driveway in Centennial?
Usually you can walk on it after a day or two and drive a car on it after about a week, with heavier trucks waiting longer. That wait is curing, the slab slowly gaining strength while it holds onto its moisture, and rushing it is how you get a weak, dusty top. Park on the street for the week, it's cheaper than a new driveway.
How thick should a concrete driveway be in Centennial?
Most home driveways are poured about 4 inches thick, and 5 to 6 inches is common where a heavy truck, an RV or a trailer parks. Thickness only helps if the base under it is solid, so at the estimate I'll ask what you park there and check the ground before we settle on a number.
Tell us about your Centennial concrete job
Call (720) 676-1126 any day from 8 AM to 9 PM, or use the form, and tell us what's cracking, sinking or missing so I show up knowing what to look for.
